The Pin,straight,headless, cataloged under National Stock Number 5315-00-699-9991, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-699-9991 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| First End Taper Length | 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-16232,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Second End Taper Angle | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
| First End Style | CHAMFERED |
| Hardness Rating | 58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.035 INCHES NOMINAL IN |
| First End Taper Angle | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| Pin Overall Diameter | 0.2501 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM IN |
| Pin Overall Length | 0.300 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN |
| Second End Relationship with First End | NOT IDENTICAL |
| Surface Treatment | PHOSPHATE ZINC OVERALL |
| Second End Style | CHAMFERED |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7268992 | 3/9 Design control — primary reference Springfield Armory |
NSN 5315-00-699-9991 is a Pin,straight,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-699-9991: First End Taper Length: 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-16232,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Second End Taper Angle: 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM; First End Style: CHAMFERED. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.