PartsTable TECHNICAL DATA SHEET
NSN 5315-00-696-2634Government record, cited

Pin, Grooved, Headed5315-00-696-2634

NSN 5315-00-696-2634 · NIIN 006962634
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-696-2634 · 5315006962634 · NIIN 006962634 · 00-696-2634 · FSC 5315 Nails, Machine Keys, and Pins
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Surface Finish: 63.0 MICROINCHES LONG SHANK
  • Undercut Width: 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
  • First End Taper Length: 0.030 INCHES NOMINAL IN
  • Undercut Diameter: 0.773 INCHES MINIMUM AND 0.779 INCHES MAXIMUM IN
  • Distance From Centerline to Flat: 0.460 INCHES NOMINAL IN
  • Under Head Length: 1.410 INCHES NOMINAL IN
  • First End Style: CHAMFERED
Identification
  • NSN: 5315-00-696-2634
  • NIIN: 006962634
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-00-696-2634, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-696-2634
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Surface Finish63.0 MICROINCHES LONG SHANK
Undercut Width0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
First End Taper Length0.030 INCHES NOMINAL IN
Undercut Diameter0.773 INCHES MINIMUM AND 0.779 INCHES MAXIMUM IN
Distance From Centerline to Flat0.460 INCHES NOMINAL IN
Under Head Length1.410 INCHES NOMINAL IN
First End StyleCHAMFERED
Style DesignatorGROOVE
Pin Head Diameter1.060 INCHES NOMINAL IN
Material Document and ClassificationMIL-S-675 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
Diameter0.8100 INCHES MINIMUM AND 0.8105 INCHES MAXIMUM IN
First End Taper Angle45.0 DEGREES NOMINAL
Effective Length1.261 INCHES MINIMUM AND 1.274 INCHES MAXIMUM IN
Head StyleDEE
Height0.120 INCHES NOMINAL IN
MaterialSTEEL COMP 4130 OR STEEL COMP 8630 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3120-00-968-4034 POSSIBLE MATCH
BUSHING,SLEEVE
Possible match (shared part number)
2990-01-108-7836480630 POSSIBLE MATCH
PIPE,EXHAUST
Possible match (shared part number)Hobart Brothers Llc
6510-01-484-4107480630 POSSIBLE MATCH
BANDAGE,ELASTIC
Possible match (shared part number)Patterson Veterinary Supply, Inc. Div Patterson Veterinary Supply
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
4-80630 3/2 Design control — primary reference
U.S. Government activity
Related Parts
3120-00-968-4034POSSIBLE MATCH
BUSHING,SLEEVE
2990-01-108-7836POSSIBLE MATCH
PIPE,EXHAUST
480630
6510-01-484-4107POSSIBLE MATCH
BANDAGE,ELASTIC
480630

Frequently Asked Questions

What is NSN 5315-00-696-2634?

NSN 5315-00-696-2634 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What NSN replaces 5315-00-696-2634?

3 possible matches (shared part number, not a government interchangeability claim): 3120-00-968-4034, 2990-01-108-7836, 6510-01-484-4107. Verify interchangeability with system specifications before substitution.

What are the specifications of 5315-00-696-2634?

Key specifications for 5315-00-696-2634: Surface Finish: 63.0 MICROINCHES LONG SHANK; Undercut Width: 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.773 INCHES MINIMUM AND 0.779 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-696-2634 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com