The Pin,grooved,headed, cataloged under National Stock Number 5315-00-684-9751, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-684-9751 |
| Primary Part Number | 7009915P1 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Undercut Width | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN |
| Undercut Diameter | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN |
| Under Head Length | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.181 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN |
| Material | STEEL COMP 303S OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5315-00-684-9751 is a Pin,grooved,headed, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-684-9751 has 2 manufacturer part numbers on file: 7009915P1 (General Electric Company), 7009915P1 (Lockheed Martin Corporation Div Rms).
Key specifications for 7009915P1: Undercut Width: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN; First End Taper Length: 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN; Undercut Diameter: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN; Under Head Length: 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.