The Pin,grooved,headed, cataloged under National Stock Number 5315-00-610-4288, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-610-4288 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.015 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES NOMINAL IN |
| Undercut Diameter | 0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN |
| Under Head Length | 0.531 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.250 INCHES NOMINAL IN |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.153 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.447 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN |
| Head Style | FLAT FILLISTER |
| Height | 0.625 INCHES NOMINAL IN |
| Material | STEEL COMP 1018 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CB57-42532PC11 | 5/9 Secondary reference U.S. Government activity |
| CB57-42538-1 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-00-610-4288 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-610-4288: Undercut Width: 0.015 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES NOMINAL IN; Undercut Diameter: 0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN; Under Head Length: 0.531 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.