The Pin,grooved,headless, cataloged under National Stock Number 5315-00-582-1522, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-582-1522 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES SHANK END |
| Undercut Width | 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| First End Taper Length | 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN |
| Undercut Diameter | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | MIL-P-16232,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Hardness Rating | 265.0 BRINELL HULTGREN MINIMUM AND 290.0 BRINELL HULTGREN MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Material Document and Classification | MIL-T-18291,CLASS W1-NDR MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| First End Taper Angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN |
| Surface Treatment | PHOSPHATE OVERALL |
| Material | STEEL COMP W110 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1591438 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-00-582-1522 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-582-1522: Surface Finish: 32.0 MICROINCHES SHANK END; Undercut Width: 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN; First End Taper Length: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN; Undercut Diameter: 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.