The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-576-8634, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-576-8634 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.3128 INCHES MINIMUM AND 0.3130 INCHES MAXIMUM IN |
| Surface Finish | 16.0 MICROINCHES LONG SHANK |
| Surface Finish | 63.0 MICROINCHES SHORT SHANK END |
| Undercut Width | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| Undercut Diameter | 0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| First End Location | LONG END |
| First End Style | CHAMFERED |
| Shank Length | 0.085 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Style Designator | UNDERCUT |
| First End Taper Angle | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| Second End Relationship with First End | NOT IDENTICAL |
| Shoulder Diameter | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN |
| Second Shank Length | 0.754 INCHES MINIMUM AND 0.759 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Second End Style | SQUARE |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SMA287346 | 5/2 Secondary reference U.S. Government activity |
| SMA287346 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-00-576-8634 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-576-8634: Shank Diameter: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN; Second Shank Diameter: 0.3128 INCHES MINIMUM AND 0.3130 INCHES MAXIMUM IN; Surface Finish: 16.0 MICROINCHES LONG SHANK; Surface Finish: 63.0 MICROINCHES SHORT SHANK END. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.