The Pin,grooved,headless, cataloged under National Stock Number 5315-00-576-3462, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-576-3462 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 16.0 MICROINCHES OVERALL |
| Undercut Width | 0.016 INCHES NOMINAL IN |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| Undercut Diameter | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Material Document and Classification | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN |
| First End Taper Angle | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Pin Small End Diameter | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Undercut Radius | 0.002 INCHES MAXIMUM IN |
| Material | STEEL COMP 416 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SMA287064 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-576-3462 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-576-3462: Surface Finish: 16.0 MICROINCHES OVERALL; Undercut Width: 0.016 INCHES NOMINAL IN; First End Taper Length: 0.016 INCHES NOMINAL IN; Undercut Diameter: 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.