The Pin,grooved,headless, cataloged under National Stock Number 5315-00-563-3784, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-563-3784 |
| Primary Part Number | 8000816 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Undercut Width | 0.086 INCHES NOMINAL IN |
| First End Taper Length | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN |
| Undercut Diameter | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | QQ-Z-325,TYPE2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Diameter | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| First End Taper Angle | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 4.060 INCHES NOMINAL IN |
| Surface Treatment | ZINC AND CHROMATE OVERALL |
| Undercut Radius | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8000816 PRIMARY | Us Army Aviation and Missile Command (USA) |
NSN 5315-00-563-3784 is a Pin,grooved,headless, manufactured by Us Army Aviation and Missile Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-563-3784 has 1 manufacturer part number on file: 8000816 (Us Army Aviation and Missile Command).
Key specifications for 8000816: Undercut Width: 0.086 INCHES NOMINAL IN; First End Taper Length: 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN; Undercut Diameter: 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.