The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-520-2829, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Hamilton Sundstrand Corporation. Government technical data includes 14 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-520-2829 |
| Primary Part Number | 694511 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Hamilton Sundstrand Corporation |
| Status | ACTIVE |
| First End Taper Angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| Shank Diameter | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | SHOULDER |
| First End Style | CHAMFERED |
| First End Location | BOTH ENDS |
| Second Shank Diameter | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Second End Relationship with First End | IDENTICAL |
| Shoulder Diameter | 0.1567 INCHES MINIMUM AND 0.1572 INCHES MAXIMUM IN |
| Second Shank Length | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN |
| Shank Length | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| Surface Treatment | NICKEL OVERALL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 694511 PRIMARY | Hamilton Sundstrand Corporation (USA) |
NSN 5315-00-520-2829 is a Pin,shoulder,headless, manufactured by Hamilton Sundstrand Corporation, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-00-520-2829 has 1 cross-referenced part number: 694511 (Hamilton Sundstrand Corporation).
There are 3 known substitutes for 5315-00-520-2829: 5340-00-758-0434, 3930-01-080-9043, 5920-01-337-5404. Verify interchangeability with system specifications before substitution.
Key specifications for 694511: First End Taper Angle: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM; Shank Diameter: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN; Material: STEEL COMP 4140 OR STEEL COMP 8740 OVERALL; Hardness Rating: 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL. 15 total characteristics are documented in the Federal Logistics Information System.