The Pin,grooved,headed, cataloged under National Stock Number 5315-00-509-8342, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-509-8342 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES LONG SHANK |
| Undercut Width | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Undercut Diameter | 0.593 INCHES MINIMUM AND 0.596 INCHES MAXIMUM IN |
| Under Head Length | 1.812 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.750 INCHES NOMINAL IN |
| Diameter | 0.6242 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 1.625 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Second Undercut Width | 0.062 INCHES NOMINAL IN |
| Height | 0.093 INCHES NOMINAL IN |
| Second Undercut Diameter | 0.593 INCHES NOMINAL IN |
| Material | STEEL COMP 8620 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1527532 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-00-509-8342 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-509-8342: Surface Finish: 32.0 MICROINCHES LONG SHANK; Undercut Width: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN; First End Taper Length: 0.031 INCHES NOMINAL IN; Undercut Diameter: 0.593 INCHES MINIMUM AND 0.596 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.