The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-488-1051, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-488-1051 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.276 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Shank Length | 0.135 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Material | STEEL COMP 303S OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 44A28366 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-00-488-1051 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5315-00-864-0477. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-488-1051: Shank Diameter: 0.276 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN; Second Shank Diameter: 0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; First End Taper Length: 0.016 INCHES NOMINAL IN; First End Location: BOTH ENDS. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.