The Pin,grooved,headless, cataloged under National Stock Number 5315-00-480-6874, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-480-6874 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES NOMINAL IN |
| Undercut Diameter | 0.1155 INCHES MINIMUM AND 0.1185 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | NAI1260,FSCM 76823 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.1254 INCHES MINIMUM AND 0.1257 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 0.716 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN |
| Shear Strength | 260000 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 8-11844-1 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector |
| 8-11844-1 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
NSN 5315-00-480-6874 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-480-6874: Undercut Width: 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES NOMINAL IN; Undercut Diameter: 0.1155 INCHES MINIMUM AND 0.1185 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.