The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-471-3876, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-471-3876 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.130 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.130 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| First End Location | CHAMFERED END |
| First End Style | CHAMFERED |
| Shank Length | 0.766 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Second Shank Length | 0.765 INCHES NOMINAL IN |
| Surface Treatment | OXIDE OVERALL |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 41-1303 | 3/9 Design control — primary reference Sargent-Welch Scientific Co |
NSN 5315-00-471-3876 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5962-01-473-3402. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-471-3876: Shank Diameter: 0.130 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN; Second Shank Diameter: 0.130 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN; First End Taper Length: 0.031 INCHES NOMINAL IN; First End Location: CHAMFERED END. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.