The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-460-0690, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-460-0690 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Finish | 63.000 MICROINCHES OVERALL |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Length | 0.810 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Shoulder Diameter | 0.419 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN |
| Second Shank Length | 1.285 INCHES NOMINAL IN |
| Surface Treatment | OXIDE OVERALL |
| Material | STEEL COMP 4340 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| C5P28341 | 3/9 Design control — primary reference Speco Corp |
| C5P28341 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-460-0690 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-460-0690: Shank Diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Second Shank Diameter: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Surface Finish: 63.000 MICROINCHES OVERALL; First End Taper Length: 0.030 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.