PartsTable TECHNICAL DATA SHEET
NSN 5315-00-450-7343Government record, cited

Pin, Shoulder, Headless5315-00-450-7343

NSN 5315-00-450-7343 · NIIN 004507343 · Part number 84000078
Ncr Corporation Dba Ncr · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 42470
Government record, cited
NSN 5315-00-450-7343 — this item is cataloged by the U.S. Government under National Stock Number 5315-00-450-7343. Manufacturer of record part number: 84000078.
Also searched as  5315-00-450-7343 · 5315004507343 · NIIN 004507343 · 00-450-7343 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 42470 · 84000078
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.3725 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
  • Second Shank Diameter: 0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
  • Surface Finish: 64.0 MICROINCHES OUTSIDE DIAMETER
  • First End Taper Length: 0.316 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
  • First End Location: LONG END
  • Surface Treatment Document and Classification: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
Identification
  • NSN: 5315-00-450-7343
  • NIIN: 004507343
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 84000078
  • Manufacturer: Ncr Corporation Dba Ncr
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-450-7343, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Ncr Corporation Dba Ncr. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-450-7343
Primary Part Number84000078
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerNcr Corporation Dba Ncr
StatusACTIVE
Shank Diameter0.3725 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
Second Shank Diameter0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Surface Finish64.0 MICROINCHES OUTSIDE DIAMETER
First End Taper Length0.316 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
First End LocationLONG END
Surface Treatment Document and ClassificationMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
First End StyleCHAMFERED
Shank Length1.160 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
Style DesignatorSHOULDER
Material Document and ClassificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
First End Taper Angle25.0 DEGREES NOMINAL
Second End Relationship with First EndNOT IDENTICAL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.375 INCHES IN
Second Shank Length0.450 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
Shoulder Width Across Flats0.615 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Second End StyleSQUARE
Thread Class2A A
MaterialSTEEL COMP 316 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
84000078 PRIMARY Ncr Corporation Dba Ncr (USA)
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-450-7343?

NSN 5315-00-450-7343 is a Pin,shoulder,headless, manufactured by Ncr Corporation Dba Ncr, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-00-450-7343?

NSN 5315-00-450-7343 has 1 manufacturer part number on file: 84000078 (Ncr Corporation Dba Ncr).

What are the specifications of 84000078?

Key specifications for 84000078: Shank Diameter: 0.3725 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN; Second Shank Diameter: 0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Surface Finish: 64.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.316 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-450-7343 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com