PartsTable TECHNICAL DATA SHEET
NSN 5315-00-426-1185Government record, cited

Pin, Shoulder, Headless5315-00-426-1185

NSN 5315-00-426-1185 · NIIN 004261185 · Part number 6871533
Rolls-Royce Corporation · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 63005
Government record, cited
NSN 5315-00-426-1185 — this item is cataloged by the U.S. Government under National Stock Number 5315-00-426-1185. Manufacturer of record part number: 6871533.
Also searched as  5315-00-426-1185 · 5315004261185 · NIIN 004261185 · 00-426-1185 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 63005 · 6871533
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
  • Surface Finish: 63.0 MICROINCHES OVERALL
  • First End Taper Length: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
  • First End Location: BOTH ENDS
  • First End Style: CHAMFERED
  • Shank Length: 0.170 INCHES NOMINAL IN
  • Style Designator: SHOULDER
Identification
  • NSN: 5315-00-426-1185
  • NIIN: 004261185
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 6871533
  • Manufacturer: Rolls-Royce Corporation
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-426-1185, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Rolls-Royce Corporation. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-426-1185
Primary Part Number6871533
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerRolls-Royce Corporation
StatusACTIVE
Shank Diameter0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
Surface Finish63.0 MICROINCHES OVERALL
First End Taper Length0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
First End LocationBOTH ENDS
First End StyleCHAMFERED
Shank Length0.170 INCHES NOMINAL IN
Style DesignatorSHOULDER
Material Document and ClassificationAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
First End Taper Angle45.0 DEGREES NOMINAL
Second End Relationship with First EndIDENTICAL
Shoulder Diameter0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
MaterialSTEEL OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
6871533 PRIMARY Rolls-Royce Corporation (USA)
Reference documents
ReferenceMeaning
6871533 5/9 Secondary reference
Allison Transmission Inc Dba Allison Transmission, Inc
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-426-1185?

NSN 5315-00-426-1185 is a Pin,shoulder,headless, manufactured by Rolls-Royce Corporation, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-00-426-1185?

NSN 5315-00-426-1185 has 1 manufacturer part number on file: 6871533 (Rolls-Royce Corporation).

What are the specifications of 6871533?

Key specifications for 6871533: Shank Diameter: 0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN; Surface Finish: 63.0 MICROINCHES OVERALL; First End Taper Length: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 12 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-426-1185 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com