The Pin,grooved,headless, cataloged under National Stock Number 5315-00-413-1362, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-413-1362 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Undercut Width | 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| First End Taper Length | 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| Undercut Diameter | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | H+4-169,FSCM 82577 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 1.020 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN |
| Second Undercut Width | 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 303SE OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3402892-2 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 3180544-2 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-413-1362 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-413-1362: Surface Finish: 125.0 MICROINCHES OVERALL; Undercut Width: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; First End Taper Length: 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; Undercut Diameter: 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.