PartsTable TECHNICAL DATA SHEET
NSN 5315-00-384-2699Government record, cited

Pin, Grooved, Headed5315-00-384-2699

NSN 5315-00-384-2699 · NIIN 003842699
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-384-2699 · 5315003842699 · NIIN 003842699 · 00-384-2699 · FSC 5315 Nails, Machine Keys, and Pins
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Surface Finish: 125.0 MICROINCHES HEAD OUTSIDE DIAMETER
  • Surface Finish: 32.0 MICROINCHES LONG SHANK
  • Surface Finish: 125.0 MICROINCHES HEAD BEARING SURFACE
  • Surface Finish: 125.0 MICROINCHES HEAD TOP
  • Surface Finish: 125.0 MICROINCHES CHAMFERED END
  • Undercut Width: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
  • First End Taper Length: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
Identification
  • NSN: 5315-00-384-2699
  • NIIN: 003842699
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-00-384-2699, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-384-2699
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Surface Finish125.0 MICROINCHES HEAD OUTSIDE DIAMETER
Surface Finish32.0 MICROINCHES LONG SHANK
Surface Finish125.0 MICROINCHES HEAD BEARING SURFACE
Surface Finish125.0 MICROINCHES HEAD TOP
Surface Finish125.0 MICROINCHES CHAMFERED END
Undercut Width0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
First End Taper Length0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
Undercut Diameter0.143 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
Distance From Centerline to Flat0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
Hole Arrangement StyleONE END DRILLED
Under Head Length1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
First End StyleCHAMFERED
First Hole Diameter0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
Criticality Code JustificationABMZ
Style DesignatorGROOVE
Pin Head Diameter0.375 INCHES NOMINAL IN
Material Document and ClassificationQQ-S-633,FS1015 THRU FS1045 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Diameter0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
First End Taper Angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
Head StyleDEE
Height0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
Surface TreatmentOXIDE OVERALL
MaterialSTEEL OVERALL
Distance From Centerline of Hole to End of Pin0.126 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
512245PC6 3/9 Design control — primary reference
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-384-2699?

NSN 5315-00-384-2699 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-00-384-2699?

Key specifications for 5315-00-384-2699: Surface Finish: 125.0 MICROINCHES HEAD OUTSIDE DIAMETER; Surface Finish: 32.0 MICROINCHES LONG SHANK; Surface Finish: 125.0 MICROINCHES HEAD BEARING SURFACE; Surface Finish: 125.0 MICROINCHES HEAD TOP. 24 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-384-2699 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com