The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-373-3322, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-373-3322 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| First End Taper Length | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| First End Location | SHANK END |
| Second End Taper Angle | 30.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| First End Style | CHAMFERED |
| Hardness Rating | 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Length | 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Material Document and Classification | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.002 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| First End Taper Angle | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Second Shank Length | 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Shoulder Width Across Flats | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN |
| Shear Strength | 130000 SINGLE POUNDS PER SQUARE INCH |
| Second End Style | CHAMFERED |
| Thread Class | 3A A |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 4027944 | 3/9 Design control — primary reference Turbo Power & Marine System Inc Sub of United Technologies Corp |
| 4027944 | 5/9 Secondary reference Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
| 4027944 | 5/2 Secondary reference U.S. Government activity |
| 4027944 | 5/2 Secondary reference U.S. Government activity |
NSN 5315-00-373-3322 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5998-01-366-2223. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-373-3322: Shank Diameter: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN; Second Shank Diameter: 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN; First End Taper Length: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN; First End Location: SHANK END. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.