The Pin,grooved,headed, cataloged under National Stock Number 5315-00-356-3504, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-356-3504 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.250 INCHES NOMINAL IN |
| First End Taper Length | 0.010 INCHES NOMINAL IN |
| Undercut Diameter | 0.200 INCHES NOMINAL IN |
| Under Head Length | 1.219 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.281 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 1.031 INCHES NOMINAL IN |
| Height | 0.062 INCHES NOMINAL IN |
| Second Undercut Diameter | 0.200 INCHES NOMINAL IN |
| Material | STEEL COMP 303 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SCB69879 | 3/2 Design control — primary reference U.S. Government activity |
| 51562 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-00-356-3504 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 2030-00-690-4019. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-356-3504: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.250 INCHES NOMINAL IN; First End Taper Length: 0.010 INCHES NOMINAL IN; Undercut Diameter: 0.200 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.