PartsTable TECHNICAL DATA SHEET
NSN 5315-00-340-4453Government record, cited

Pin, Shoulder, Headless5315-00-340-4453

NSN 5315-00-340-4453 · NIIN 003404453
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-340-4453 · 5315003404453 · NIIN 003404453 · 00-340-4453 · FSC 5315 Nails, Machine Keys, and Pins · 1137815-1 · 1137815-1
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
  • Second Shank Diameter: 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
  • First End Taper Length: 0.032 INCHES NOMINAL IN
  • First End Location: THREADED END
  • Surface Treatment Document and Classification: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Second End Taper Angle: 30.0 DEGREES NOMINAL
  • Thread Length: 0.505 INCHES NOMINAL IN
Identification
  • NSN: 5315-00-340-4453
  • NIIN: 003404453
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-340-4453, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-340-4453
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Shank Diameter0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
Second Shank Diameter0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
First End Taper Length0.032 INCHES NOMINAL IN
First End LocationTHREADED END
Surface Treatment Document and ClassificationMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Second End Taper Angle30.0 DEGREES NOMINAL
Thread Length0.505 INCHES NOMINAL IN
First End StyleCHAMFERED
Shank Length1.281 INCHES NOMINAL IN
Style DesignatorSHOULDER
Material Document and ClassificationASTM A-582 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Second End Taper Length0.218 INCHES NOMINAL IN
First End Taper Angle45.0 DEGREES NOMINAL
Second End Relationship with First EndNOT IDENTICAL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.375 INCHES IN
Second Shank Length1.005 INCHES NOMINAL IN
Shoulder Width Across Flats0.625 INCHES NOMINAL IN
Surface TreatmentPASSIVATE OVERALL
Second End StyleCHAMFERED
Thread Class2A A
MaterialSTEEL COMP 416 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
1137815-1 3/9 Design control — primary reference
Bae Systems Information and Electronic Systems Integration I
1137815-1 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-340-4453?

NSN 5315-00-340-4453 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-00-340-4453?

Key specifications for 5315-00-340-4453: Shank Diameter: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN; Second Shank Diameter: 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; First End Taper Length: 0.032 INCHES NOMINAL IN; First End Location: THREADED END. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-340-4453 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com