The Pin,grooved,headed, cataloged under National Stock Number 5315-00-335-0571, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-335-0571 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.017 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN |
| First End Taper Length | 0.015 INCHES NOMINAL IN |
| Undercut Diameter | 0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN |
| Under Head Length | 0.187 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Criticality Code Justification | ABMZ |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.187 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-763,CL 440C FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.126 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.126 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Features Provided | CASEHARDENED |
| Head Style | FLAT |
| Height | 0.031 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Test Data Document | 98230-CE11292 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| Material | STEEL COMP 440C OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| CE11292 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-335-0571 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-335-0571: Undercut Width: 0.017 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN; First End Taper Length: 0.015 INCHES NOMINAL IN; Undercut Diameter: 0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN; Under Head Length: 0.187 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.