The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-298-9902, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Defense Logistics Agency Dba Defense Supply Center Philadelphia. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-298-9902 |
| Primary Part Number | 00020 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| Status | ACTIVE |
| First End Taper Length | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN |
| Second Hole Diameter | 0.110 INCHES NOMINAL IN |
| Shank Diameter | 0.465 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Material | COPPER ALLOY 360 OVERALL |
| Material Document and Classification | AA-B-626 COMP 22 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Style Designator | UNDERCUT |
| Second End Relationship with First End | IDENTICAL |
| Shoulder Diameter | 0.465 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN |
| Second Undercut Diameter | 0.360 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN |
| Undercut Diameter | 0.360 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Hole Arrangement Style | BOTH END DRILLED |
| Second Shank Diameter | 0.465 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Shank Length | 1.672 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN |
| Center to Center Distance Between Holes | 6.172 INCHES MINIMUM AND 6.203 INCHES MAXIMUM IN |
| First Hole Diameter | 0.110 INCHES NOMINAL IN |
| Second Shank Length | 1.672 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN |
| Second Undercut Width | 0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Distance From Centerline of Hole to End of Pin | 0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN |
| Undercut Width | 0.375 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 00020 PRIMARY | Defense Logistics Agency Dba Defense Supply Center Philadelphia (USA) |
NSN 5315-00-298-9902 is a Pin,shoulder,headless, manufactured by Defense Logistics Agency Dba Defense Supply Center Philadelphia, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-00-298-9902 has 1 cross-referenced part number: 00020 (Defense Logistics Agency Dba Defense Supply Center Philadelphia).
There is 1 known substitute for 5315-00-298-9902: 6520-00-511-7150. Verify interchangeability with system specifications before substitution.
Key specifications for 00020: First End Taper Length: 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN; Second Hole Diameter: 0.110 INCHES NOMINAL IN; Shank Diameter: 0.465 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN; First End Style: CHAMFERED. 23 total characteristics are documented in the Federal Logistics Information System.