The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-292-9734, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-292-9734 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Surface Finish | 125.000 MICROINCHES OVERALL |
| Undercut Width | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| First End Taper Length | 0.031 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN |
| First Step Diameter | 0.3125 INCHES NOMINAL IN |
| First End Location | BOTH ENDS |
| Third Step Diameter | 0.1250 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Shank Length | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| Second Step Length | 0.4370 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| Second End Relationship with First End | IDENTICAL |
| Second Step Diameter | 0.2490 INCHES NOMINAL IN |
| Shoulder Diameter | 0.312 INCHES NOMINAL IN |
| First Step Length | 0.2750 INCHES NOMINAL IN |
| Material | STEEL OVERALL |
| Third Step Length | 0.1820 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| A81-1-4932 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-292-9734 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-292-9734: Shank Diameter: 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN; Surface Finish: 125.000 MICROINCHES OVERALL; Undercut Width: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; First End Taper Length: 0.031 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.