The Pin,straight,headless, cataloged under National Stock Number 5315-00-291-7176, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Army Weapons Command Attn Amswe-Ree-S. Government technical data includes 8 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-291-7176 |
| Primary Part Number | 453693 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Army Weapons Command Attn Amswe-Ree-S |
| Status | ACTIVE |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First End Taper Angle | 25.0 DEGREES NOMINAL |
| Pin Overall Diameter | 0.2465 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN |
| Pin Overall Length | 0.312 INCHES NOMINAL IN |
| Second End Relationship with First End | IDENTICAL |
| Surface Treatment | ZINC AND DICHROMATE OVERALL |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 453693 | Army Weapons Command Attn Amswe-Ree-S (USA) |
| Reference | Meaning |
|---|---|
| 453693 | 5/1 Secondary reference General Motors Corp |
NSN 5315-00-291-7176 is a Pin,straight,headless, manufactured by Army Weapons Command Attn Amswe-Ree-S, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-291-7176 has 1 manufacturer part number on file: 453693 (Army Weapons Command Attn Amswe-Ree-S).
Key specifications for 453693: First End Taper Length: 0.016 INCHES NOMINAL IN; First End Style: CHAMFERED; First End Taper Angle: 25.0 DEGREES NOMINAL; Pin Overall Diameter: 0.2465 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN. 8 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.