PartsTable TECHNICAL DATA SHEET
NSN 5315-00-291-2055Government record, cited

Pin, Grooved, Headed5315-00-291-2055

NSN 5315-00-291-2055 · NIIN 002912055
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-291-2055 · 5315002912055 · NIIN 002912055 · 00-291-2055 · FSC 5315 Nails, Machine Keys, and Pins
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER
  • Undercut Width: 0.019 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
  • First End Taper Length: 0.005 INCHES NOMINAL IN
  • Undercut Diameter: 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
  • Under Head Length: 0.164 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN
  • First End Style: CHAMFERED
  • Style Designator: GROOVE
Identification
  • NSN: 5315-00-291-2055
  • NIIN: 002912055
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-00-291-2055, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-291-2055
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Surface Finish32.0 MICROINCHES OUTSIDE DIAMETER
Undercut Width0.019 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
First End Taper Length0.005 INCHES NOMINAL IN
Undercut Diameter0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
Under Head Length0.164 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN
First End StyleCHAMFERED
Style DesignatorGROOVE
Pin Head Diameter0.250 INCHES NOMINAL IN
Diameter0.121 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
First End Taper Angle45.0 DEGREES NOMINAL
Effective Length0.118 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
Head StyleFLAT
Height0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
Surface TreatmentSILVER AND RHODIUM OVERALL
MaterialSTEEL OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
6145-01-134-0842 POSSIBLE MATCH
WIRE,ELECTRICAL
Possible match (shared part number)
5930-01-339-324699-752 POSSIBLE MATCH
SWITCH,PUSH
Possible match (shared part number)Applied Avionics, Llc Dba Applied Avionics, Inc
7045-01-450-436399752 POSSIBLE MATCH
CLEANER,CD
Possible match (shared part number)Fellowes Inc
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
99752 3/9 Design control — primary reference
Bell and Howell Phillipsburg Co Corporate Offices
Related Parts
6145-01-134-0842POSSIBLE MATCH
WIRE,ELECTRICAL
5930-01-339-3246POSSIBLE MATCH
SWITCH,PUSH
99-752
7045-01-450-4363POSSIBLE MATCH
CLEANER,CD
99752

Frequently Asked Questions

What is NSN 5315-00-291-2055?

NSN 5315-00-291-2055 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What NSN replaces 5315-00-291-2055?

3 possible matches (shared part number, not a government interchangeability claim): 6145-01-134-0842, 5930-01-339-3246, 7045-01-450-4363. Verify interchangeability with system specifications before substitution.

What are the specifications of 5315-00-291-2055?

Key specifications for 5315-00-291-2055: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.019 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN; First End Taper Length: 0.005 INCHES NOMINAL IN; Undercut Diameter: 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-291-2055 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com