The Pin,straight,headed, cataloged under National Stock Number 5315-00-291-1408, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-291-1408 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Width Across Flats | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Chamfer Length | 0.031 INCHES NOMINAL IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 3.646 INCHES MINIMUM AND 3.666 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| First Hole Diameter | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.625 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-6758,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Head Style | ROUND W/WRENCH FLATS |
| Height | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL COMP 4130 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1329533 | 5/9 Secondary reference The Boeing Company |
| 1329533 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-291-1408 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-291-1408: Width Across Flats: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN; Chamfer Length: 0.031 INCHES NOMINAL IN; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 3.646 INCHES MINIMUM AND 3.666 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.