The Pin,grooved,headed, cataloged under National Stock Number 5315-00-290-6249, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-290-6249 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| First End Taper Length | 0.078 INCHES NOMINAL IN |
| Undercut Diameter | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | A-14088 FSCM 58275 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 0.968 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.438 INCHES NOMINAL IN |
| Diameter | 0.306 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES NOMINAL |
| Effective Length | 0.817 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN |
| Head Style | FLAT CHAMFER |
| Height | 0.094 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL COMP 1020 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| A74453 | 5/9 Secondary reference Sasco Inc Canadian Div |
| 3151297 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-290-6249 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-290-6249: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN; First End Taper Length: 0.078 INCHES NOMINAL IN; Undercut Diameter: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.