The Pin,straight,headed, cataloged under National Stock Number 5315-00-271-3067, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-271-3067 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Width Across Flats | 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| Chamfer Length | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 1.130 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| First Hole Diameter | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Diameter | 0.3755 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN |
| Head Style | ROUND W/WRENCH FLATS |
| Height | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| Surface Treatment | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.393 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 511980PC10 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-00-271-3067 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-271-3067: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Width Across Flats: 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN; Chamfer Length: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.