The Pin,grooved,headless, cataloged under National Stock Number 5315-00-264-0580, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-264-0580 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| First End Taper Length | 0.060 INCHES NOMINAL IN |
| Undercut Diameter | 0.458 INCHES MINIMUM AND 0.461 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | QQ-S-637 COMP 1141 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 5.940 INCHES MINIMUM AND 5.970 INCHES MAXIMUM IN |
| Second Undercut Width | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Material | STEEL COMP 1141 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 11768-156 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-264-0580 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-264-0580: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN; First End Taper Length: 0.060 INCHES NOMINAL IN; Undercut Diameter: 0.458 INCHES MINIMUM AND 0.461 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.