The Pin,grooved,headed, cataloged under National Stock Number 5315-00-247-0653, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-247-0653 |
| Primary Part Number | 1533356 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OUTSIDE DIAMETER |
| Surface Finish | 125.0 MICROINCHES ALL OTHER SURFACES |
| Undercut Width | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES NOMINAL IN |
| Undercut Diameter | 0.151 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN |
| Under Head Length | 1.458 INCHES MINIMUM AND 1.478 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-862,CLASS 324 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN |
| First End Taper Angle | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| Head Style | FLAT CHAMFER |
| Height | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1533356 PRIMARY | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
NSN 5315-00-247-0653 is a Pin,grooved,headed, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-247-0653 has 1 manufacturer part number on file: 1533356 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).
Key specifications for 1533356: Surface Finish: 63.0 MICROINCHES OUTSIDE DIAMETER; Surface Finish: 125.0 MICROINCHES ALL OTHER SURFACES; Undercut Width: 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.