The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-245-8775, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-245-8775 |
| Primary Part Number | 9754-15 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Goodrich Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.4375 INCHES NOMINAL IN |
| Surface Finish | 32.0 MICROINCHES SHOULDER END |
| First End Taper Length | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN |
| First End Location | SHOULDER END |
| Surface Treatment Document and Classification | CPT-8206 FSCM 13002 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Second End Taper Angle | 45.0 DEGREES NOMINAL |
| Hole Arrangement Style | ONE END DRILLED |
| Thread Length | 0.422 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Length | 0.422 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.040 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.438 INCHES IN |
| Shoulder Diameter | 0.4988 INCHES MINIMUM AND 0.4993 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Second End Style | CHAMFERED |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP E4340 OR STEEL COMP 4340 OVERALL |
| Thread Series Designator | UNF |
| Distance From Centerline of Hole to End of Pin | 0.120 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9754-15 PRIMARY | Goodrich Corporation (USA) |
| Reference | Meaning |
|---|---|
| 9754-15 | 3/9 Design control — primary reference Goodrich Corporation Div Advanced Structures Landing Systems |
NSN 5315-00-245-8775 is a Pin,shoulder,headless, manufactured by Goodrich Corporation, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-245-8775 has 1 manufacturer part number on file: 9754-15 (Goodrich Corporation).
1 possible match (shared part number, not a government interchangeability claim): 1005-01-689-6957. Verify interchangeability with system specifications before substitution.
Key specifications for 9754-15: Shank Diameter: 0.4375 INCHES NOMINAL IN; Surface Finish: 32.0 MICROINCHES SHOULDER END; First End Taper Length: 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN; First End Location: SHOULDER END. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.