The Pin,grooved,headed, cataloged under National Stock Number 5315-00-209-7111, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Crestview Aerospace Llc Div Crestview Aerospace. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-209-7111 |
| Primary Part Number | 8B513003 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Crestview Aerospace Llc Div Crestview Aerospace |
| Status | ACTIVE |
| Surface Finish | 40.0 MICROINCHES OUTSIDE DIAMETER |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| Undercut Diameter | 0.322 INCHES MINIMUM AND 0.352 INCHES MAXIMUM IN |
| Under Head Length | 3.740 INCHES MINIMUM AND 3.770 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.620 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 3.540 INCHES MINIMUM AND 3.570 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.090 INCHES NOMINAL IN |
| Undercut Radius | 0.005 INCHES MAXIMUM IN |
| Material | STEEL COMP E4340 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8B513003 PRIMARY | Crestview Aerospace Llc Div Crestview Aerospace (USA) |
NSN 5315-00-209-7111 is a Pin,grooved,headed, manufactured by Crestview Aerospace Llc Div Crestview Aerospace, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-209-7111 has 1 manufacturer part number on file: 8B513003 (Crestview Aerospace Llc Div Crestview Aerospace).
Key specifications for 8B513003: Surface Finish: 40.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.322 INCHES MINIMUM AND 0.352 INCHES MAXIMUM IN; Under Head Length: 3.740 INCHES MINIMUM AND 3.770 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.