The Pin,straight,headless, cataloged under National Stock Number 5315-00-195-3606, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Instruments and Flight Research, Inc.. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-195-3606 |
| Primary Part Number | 576364-1 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Instruments and Flight Research, Inc. |
| Status | ACTIVE |
| First End Taper Length | 0.015 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| Hole Arrangement Style | BOTH END DRILLED |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Pin Overall Diameter | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM IN |
| Pin Overall Length | 3.625 INCHES NOMINAL IN |
| Second End Relationship with First End | IDENTICAL |
| Second Hole Diameter | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Center to Center Distance Between Holes | 1.959 INCHES NOMINAL IN |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | STEEL COMP 303 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.291 INCHES NOMINAL IN |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 576364-1 | Instruments and Flight Research, Inc. (USA) |
| Reference | Meaning |
|---|---|
| 576364-1 | 3/9 Design control — primary reference U.S. Government activity |
| 576364-1 | 3/1 Design control — primary reference Curtiss-Wright Controls, Inc. Div Actuation Division |
NSN 5315-00-195-3606 is a Pin,straight,headless, manufactured by Instruments and Flight Research, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-195-3606 has 1 manufacturer part number on file: 576364-1 (Instruments and Flight Research, Inc.).
Key specifications for 576364-1: First End Taper Length: 0.015 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; Hole Arrangement Style: BOTH END DRILLED; Special Test Features: SPECIAL QUALITY CONTROL TESTING; First End Style: CHAMFERED. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.