The Pin,straight,headed, cataloged under National Stock Number 5315-00-177-7742, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is General Motors Corp. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-177-7742 |
| Primary Part Number | 9416017 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | General Motors Corp |
| Status | ACTIVE |
| Chamfer Length | 0.045 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| First Hole Diameter | 0.104 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.438 INCHES NOMINAL IN |
| Diameter | 0.306 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN |
| Head Style | FLAT CHAMFER |
| Height | 0.094 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM OR ZINC OVERALL |
| Material | STEEL COMP 1010 OR STEEL COMP 1111 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.105 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9416017 PRIMARY | General Motors Corp (USA) |
NSN 5315-00-177-7742 is a Pin,straight,headed, manufactured by General Motors Corp, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-177-7742 has 1 manufacturer part number on file: 9416017 (General Motors Corp).
Key specifications for 9416017: Chamfer Length: 0.045 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN; Pin Chamfer Angle: 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.