The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-168-4497, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-168-4497 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Surface Finish | 63.000 MICROINCHES OUTSIDE DIAMETER |
| First End Taper Length | 0.015 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| First End Location | LARGE END |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 3,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Second End Taper Angle | 45.0 DEGREES NOMINAL |
| Thread Length | 1.870 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Shank Length | 1.870 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Material Document and Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.045 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.438 INCHES IN |
| Shoulder Diameter | 0.618 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND PHOSPHATE OVERALL |
| Second End Style | CHAMFERED |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 80-002-2 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-168-4497 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
2 possible matches (shared part number, not a government interchangeability claim): 2330-00-727-1153, 6685-00-731-5932. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-168-4497: Shank Diameter: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN; Surface Finish: 63.000 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.015 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN; First End Location: LARGE END. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.