The Pin,grooved,headed, cataloged under National Stock Number 5315-00-165-8398, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-165-8398 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Undercut Diameter | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Under Head Length | 1.339 INCHES MINIMUM AND 1.349 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Pin Head Diameter | 0.312 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.166 INCHES MINIMUM AND 0.173 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.062 INCHES NOMINAL IN |
| Second Undercut Radius | 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| Second Undercut Diameter | 0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2584298 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-165-8398 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5340-01-565-8761. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-00-165-8398: First End Taper Length: 0.031 INCHES NOMINAL IN; Undercut Diameter: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Under Head Length: 1.339 INCHES MINIMUM AND 1.349 INCHES MAXIMUM IN; First End Style: CHAMFERED. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.