The Pin,straight,headed, cataloged under National Stock Number 5315-00-141-1664, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-141-1664 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES SHANK END |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.891 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| First Hole Diameter | 0.073 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-890 ALLOY NO. 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.2795 INCHES MINIMUM AND 0.2805 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN |
| Surface Treatment | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.109 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 611245PC1 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-00-141-1664 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-141-1664: Surface Finish: 32.0 MICROINCHES SHANK END; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 0.891 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN; First Hole Diameter: 0.073 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.