The Pin,shoulder,headless, cataloged under National Stock Number 5315-00-128-2055, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-128-2055 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.1255 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Shank Length | 0.135 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Material Document and Classification | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Shoulder Diameter | 0.250 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 303 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SMB597191 | 3/2 Design control — primary reference U.S. Government activity |
| SMB597191 | 5/9 Secondary reference Ultra Electronics Maritime Systems Inc Div Subsidiary of Ultra Electronics Holdings Limited |
NSN 5315-00-128-2055 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-128-2055: Shank Diameter: 0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN; Second Shank Diameter: 0.1255 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.