The Pin,grooved,headed, cataloged under National Stock Number 5315-00-126-2477, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-126-2477 |
| Primary Part Number | 10516530 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN |
| First End Taper Length | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| Undercut Diameter | 0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 0.790 INCHES MINIMUM IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN |
| Material Document and Classification | ASTM A582 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| Diameter | 0.1570 INCHES MINIMUM AND 0.1573 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.722 INCHES NOMINAL IN |
| Head Style | FLAT CHAMFER |
| Second Undercut Width | 0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN |
| Height | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Second Undercut Diameter | 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN |
| Material | STEEL COMP 303 OR STEEL COMP 303SE OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10516530 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
NSN 5315-00-126-2477 is a Pin,grooved,headed, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-126-2477 has 1 manufacturer part number on file: 10516530 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
1 possible match (shared part number, not a government interchangeability claim): 5995-01-215-3326. Verify interchangeability with system specifications before substitution.
Key specifications for 10516530: Surface Finish: 63.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN; First End Taper Length: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN; Undercut Diameter: 0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.