The Pin,grooved,headed, cataloged under National Stock Number 5315-00-119-9351, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-119-9351 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| Undercut Diameter | 0.817 INCHES MINIMUM AND 0.825 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 1.620 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Hardness Rating | 33.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.070 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.870 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 1.500 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Shear Strength | 160000 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 4340 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 29-47796-2 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-119-9351 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-119-9351: Undercut Width: 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.817 INCHES MINIMUM AND 0.825 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.