PartsTable TECHNICAL DATA SHEET
NSN 5315-00-116-4301Government record, cited

Pin, Grooved, Headed5315-00-116-4301

NSN 5315-00-116-4301 · NIIN 001164301 · Part number 3302-042
Woodward, Inc. Div Fuel Systems and Controls · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 66503
Government record, cited
NSN 5315-00-116-4301 — this item is cataloged by the U.S. Government under National Stock Number 5315-00-116-4301. Manufacturer of record part number: 3302-042.
Also searched as  5315-00-116-4301 · 5315001164301 · NIIN 001164301 · 00-116-4301 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 66503 · 3302-042
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Surface Finish: 16.0 MICROINCHES LONG SHANK
  • Undercut Width: 0.090 INCHES NOMINAL IN
  • First End Taper Length: 0.016 INCHES NOMINAL IN
  • Undercut Diameter: 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
  • Under Head Length: 1.847 INCHES NOMINAL IN
  • First End Style: CHAMFERED
  • Style Designator: GROOVE
Identification
  • NSN: 5315-00-116-4301
  • NIIN: 001164301
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 3302-042
  • Manufacturer: Woodward, Inc. Div Fuel Systems and Controls
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-00-116-4301, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Woodward, Inc. Div Fuel Systems and Controls. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-116-4301
Primary Part Number3302-042
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerWoodward, Inc. Div Fuel Systems and Controls
StatusACTIVE
Surface Finish16.0 MICROINCHES LONG SHANK
Undercut Width0.090 INCHES NOMINAL IN
First End Taper Length0.016 INCHES NOMINAL IN
Undercut Diameter0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
Under Head Length1.847 INCHES NOMINAL IN
First End StyleCHAMFERED
Style DesignatorGROOVE
Pin Head Diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
Material Document and ClassificationAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Diameter0.2327 INCHES MINIMUM AND 0.2337 INCHES MAXIMUM IN
First End Taper Angle45.0 DEGREES NOMINAL
Features ProvidedCASEHARDENED
Head StyleFLAT FILLISTER
Height0.090 INCHES NOMINAL IN
MaterialSTEEL COMP 8620H OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
3302-042 PRIMARY Woodward, Inc. Div Fuel Systems and Controls (USA)
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-116-4301?

NSN 5315-00-116-4301 is a Pin,grooved,headed, manufactured by Woodward, Inc. Div Fuel Systems and Controls, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-00-116-4301?

NSN 5315-00-116-4301 has 1 manufacturer part number on file: 3302-042 (Woodward, Inc. Div Fuel Systems and Controls).

What are the specifications of 3302-042?

Key specifications for 3302-042: Surface Finish: 16.0 MICROINCHES LONG SHANK; Undercut Width: 0.090 INCHES NOMINAL IN; First End Taper Length: 0.016 INCHES NOMINAL IN; Undercut Diameter: 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-116-4301 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com