The Pin,grooved,headless, cataloged under National Stock Number 5315-00-093-6325, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-093-6325 |
| Primary Part Number | 7020801P1 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Undercut Width | 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| First End Taper Length | 0.047 INCHES NOMINAL IN |
| Undercut Diameter | 0.330 INCHES NOMINAL IN |
| First End Location | BOTH ENDS |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | MIL-S-853 CL 7 TY C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.354 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 1.000 INCHES NOMINAL IN |
| Second Undercut Width | 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 303 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5315-00-093-6325 is a Pin,grooved,headless, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-093-6325 has 2 manufacturer part numbers on file: 7020801P1 (Lockheed Martin Corporation Div Rms), 7020801P1 (General Electric Company).
Key specifications for 7020801P1: Undercut Width: 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN; First End Taper Length: 0.047 INCHES NOMINAL IN; Undercut Diameter: 0.330 INCHES NOMINAL IN; First End Location: BOTH ENDS. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.