PartsTable TECHNICAL DATA SHEET
NSN 5315-00-052-6459Government record, cited

Pin, Straight, Headed5315-00-052-6459

NSN 5315-00-052-6459 · NIIN 000526459
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-00-052-6459 · 5315000526459 · NIIN 000526459 · 00-052-6459 · FSC 5315 Nails, Machine Keys, and Pins · 911606-4 · 215-72426-1
Nearby stock numbers  ·
Features
  • Pin,straight,headed — FSC 5315
  • Surface Finish: 125.0 MICROINCHES SHANK END
  • Chamfer Length: 0.030 INCHES NOMINAL IN
  • Under Head Length: 0.810 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN
  • Pin Chamfer Angle: 35.0 DEGREES NOMINAL
  • Hardness Rating: 40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM OVERALL
  • Style Designator: STRAIGHT
  • Pin Head Diameter: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
Identification
  • NSN: 5315-00-052-6459
  • NIIN: 000526459
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,straight,headed, cataloged under National Stock Number 5315-00-052-6459, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-052-6459
Item NamePin,straight,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Surface Finish125.0 MICROINCHES SHANK END
Chamfer Length0.030 INCHES NOMINAL IN
Under Head Length0.810 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN
Pin Chamfer Angle35.0 DEGREES NOMINAL
Hardness Rating40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM OVERALL
Style DesignatorSTRAIGHT
Pin Head Diameter0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Diameter0.122 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
Head StyleFLAT
Height0.040 INCHES NOMINAL IN
Surface TreatmentCHROMIUM OVERALL
Test Data Document81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialSTEEL COMP 630 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
911606-4 5/9 Secondary reference
U.S. Government activity
215-72426-1 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-052-6459?

NSN 5315-00-052-6459 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-00-052-6459?

Key specifications for 5315-00-052-6459: Surface Finish: 125.0 MICROINCHES SHANK END; Chamfer Length: 0.030 INCHES NOMINAL IN; Under Head Length: 0.810 INCHES MINIMUM AND 0.815 INCHES MAXIMUM IN; Pin Chamfer Angle: 35.0 DEGREES NOMINAL. 14 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-052-6459 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com