The Pin,straight,headless, cataloged under National Stock Number 5315-00-050-5557, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is General Motors Corp. Government technical data includes 8 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-050-5557 |
| Primary Part Number | 103719 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | General Motors Corp |
| Status | ACTIVE |
| First End Taper Angle | 25.0 DEGREES NOMINAL |
| First End Taper Length | 0.005 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN |
| Second End Relationship with First End | IDENTICAL |
| Pin Overall Diameter | 0.1870 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN |
| Pin Overall Length | 0.363 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-T-580,GR C FED SPEC ALL MATERIAL RESPONSES OVERALL |
| First End Style | CHAMFERED |
| Material | STEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OR STEEL COMP W112 OR STEEL COMP W114 OR STEEL COMP W209 OR STEEL COMP W210 OR STEEL COMP W214 OR STEEL COMP W310 OVERALL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5315-00-050-5557 is a Pin,straight,headless, manufactured by General Motors Corp, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-00-050-5557 has 2 cross-referenced part numbers: 103719 (General Motors Corp), 103719 (General Motors Llc Dba General Motors Llc).
There are 3 known substitutes for 5315-00-050-5557: 3110-00-155-6716, 6620-00-181-6196, 3020-00-237-8630. Verify interchangeability with system specifications before substitution.
Key specifications for 103719: First End Taper Angle: 25.0 DEGREES NOMINAL; First End Taper Length: 0.005 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN; Second End Relationship with First End: IDENTICAL; Pin Overall Diameter: 0.1870 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN. 8 total characteristics are documented in the Federal Logistics Information System.