The Pin,grooved,headed, cataloged under National Stock Number 5315-00-032-5610, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-032-5610 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 16.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.046 INCHES NOMINAL IN |
| First End Taper Length | 0.490 INCHES NOMINAL IN |
| Undercut Diameter | 0.704 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | ST+58-301,98897 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 1.980 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.251 INCHES MINIMUM AND 0.258 INCHES MAXIMUM IN |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.000 INCHES NOMINAL IN |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.7495 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM IN |
| First End Taper Angle | 7.0 DEGREES NOMINAL |
| Effective Length | 0.995 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Head Style | FLUSH |
| Height | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 630 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.380 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 4F55524-101A | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-032-5610 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-032-5610: Surface Finish: 16.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.046 INCHES NOMINAL IN; First End Taper Length: 0.490 INCHES NOMINAL IN; Undercut Diameter: 0.704 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.