The Pin,grooved,headed, cataloged under National Stock Number 5315-00-024-7707, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-024-7707 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| First End Taper Length | 0.020 INCHES NOMINAL IN |
| Undercut Diameter | 0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.703 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.09375 INCHES MINIMUM AND 0.09775 INCHES MAXIMUM IN |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.438 INCHES NOMINAL IN |
| Diameter | 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Grip Length | 0.360 INCHES NOMINAL IN |
| Height | 0.062 INCHES NOMINAL IN |
| Surface Treatment | PHOSPHATE OVERALL |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 512242PC8 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5315-00-024-7707 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-024-7707: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN; First End Taper Length: 0.020 INCHES NOMINAL IN; Undercut Diameter: 0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.