The Pin,grooved,headless, cataloged under National Stock Number 5315-00-009-5710, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-009-5710 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 100.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.017 INCHES NOMINAL IN |
| First End Taper Length | 0.016 INCHES MAXIMUM IN |
| Undercut Diameter | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | QQ-C-320 CL 2 TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.250 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Surface Treatment | CHROMIUM OVERALL |
| Material | STEEL COMP 8630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| LS1673P4-17 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-00-009-5710 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-009-5710: Surface Finish: 100.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.017 INCHES NOMINAL IN; First End Taper Length: 0.016 INCHES MAXIMUM IN; Undercut Diameter: 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.