The Pin,grooved,headed, cataloged under National Stock Number 5315-00-004-1705, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-004-1705 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES OVERALL |
| Undercut Width | 0.125 INCHES NOMINAL IN |
| First End Taper Length | 0.015 INCHES NOMINAL IN |
| Undercut Diameter | 0.093 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | CAP 177,11871 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 0.438 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.187 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.1244 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 0.203 INCHES NOMINAL IN |
| Head Style | FLAT |
| Height | 0.025 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 303 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7320-367 | 5/9 Secondary reference Recon/optical, Inc. |
| 7320-367 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-00-004-1705 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-00-004-1705: Surface Finish: 125.0 MICROINCHES OVERALL; Undercut Width: 0.125 INCHES NOMINAL IN; First End Taper Length: 0.015 INCHES NOMINAL IN; Undercut Diameter: 0.093 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.