PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5311-5
5311-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include end_item_identification: OVEN,HYDROVE, MODEL NUMBER HV-110EM, part_name_assigned_by_controlling_agency: METER,FLOW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-084-3322, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5311-5
NSN: 5340-00-084-3322
FSC: 5340
CAGE: 02121 — GOODRICH AEROSPACE CANADA LTD (CAN)
SPECIFICATIONS
end_item_identificationOVEN,HYDROVE, MODEL NUMBER HV-110EM
part_name_assigned_by_controlling_agencyMETER,FLOW
NSN5340-00-084-3322
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5311-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UN ROD CONNECTION
•
FORK DEPTH: 1.187 INCHES NOMINAL IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 3.093 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
•
SHANK LENGTH: 1.495 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 16 ROD END
•
THREAD CLASS: 3A ROD CONNECTION A
•
SHANK DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUN ROD CONNECTION
FORK DEPTH1.187 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END3.093 INCHES NOMINAL IN
HOLE DIAMETER0.750 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
SHANK LENGTH1.495 INCHES NOMINAL IN
THREAD QUANTITY PER INCH16 ROD END
THREAD CLASS3A ROD CONNECTION A
SHANK DIAMETER1.000 INCHES NOMINAL IN
END RADIUS0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
2410 15/64Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
53-115Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5311-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5311-5?
5311-5 is a DRILL,TWIST.
What parts can replace 5311-5?
There are 4 known substitutes for 5311-5: 2410 15/64, B94.11M, GGG-D-751 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5311-5?
5311-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-084-3322. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5311-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026